Epilam-4P JFE anti-flame additive
Fluorocarbon additive (additive) in the form of a fine powder based on perfluoropolyesters intended for the production of liquids, polymers, composites with fire-fighting properties, fire resistance and fire extinguishing. It can be used as additives in plastics, polymers, paints and other materials to produce products that, when in contact with an open flame or when reaching a critical temperature (above +210C), emit gases that cause Gorenje termination.
- TU:
- EAN:
- Article:
- TI:
Fluorocarbon additive (additive) in the form of a fine powder based on perfluoropolyesters intended for the production of liquids, polymers, composites with fire-fighting properties, fire resistance and fire extinguishing. It can be used as additives in plastics, polymers, paints and other materials to produce products that, when in contact with an open flame or when reaching a critical temperature (above +210C), emit gases that cause Gorenje termination.
Basic physical and chemical properties
Appearance of the material white, beige powder with shiny inclusions
bulk
Density g / cm3 2.05…2.28
Molecular weight 420± 15
Solubility: in water does not dissolve
in organic matter-esters, alcohols, toluene, acetone dissolves
benzene, etc.
Flash point With deg. 98±15
Self-ignition temperature 355±10
MPC in air mg / m3 1
The maximum permissible concentration in water bodies mg/l 0,25
Storage in glass or polyethylen
MODIFICATIONS:
JFE-1 is diluted in separation lubricants
JFE-2 is diluted in liquid lubricant compositions
JFE-3 is diluted in oils and lubricants
JFE-4 (HOUR) for dilution in fire-fighting compounds;
JFE -5 water-soluble concentrate;
JFE-6 wetting agent, diluted in paint products,
mod. 61-hydrophobicity, mod 62-antifriction
JFE-7 is diluted in polishing compounds
JFE-8 is diluted in thick lubricating compositions (lubricants, polishes, ski lubricants)