FLUORA-B5 passivator

FLUORA-B5 passivator

The PASSIVATOR “of FLUOR-B5»
(EPILAM ® -05 OF FLUOR-B”)
THAT 2412-003-13868195-2014 (Ref.TU 20.59.41-003-13868195-2014) APPLICATION

Thin –layer protective coatings “FLUORA-B5» –
one of the most effective methods of protecting the metal surface from corrosion. When the composition “Fluora-B5” interacts, a neutral (passive) compound is formed on the surface that can resist the course of corrosion processes. This treatment is called passivation of the metal. After this process is completed, a thin film is formed on the surface. It has the chemical properties of not reacting to oxidation and thus prevents the destruction of not only the surface layer, but also the entire part.

Техническое описание
  • TU: 2412-003-13868195-2014
  • EAN:
  • Article:
  • TI:

The PASSIVATOR “of FLUORА-B5»

(EPILAM ® -05 OF FLUORА-B”)

2412-003-13868195-2014 (Ref.TU 20.59.41-003-13868195-2014)

 

APPLICATION

Thin –layer protective coatings “FLUORA-B5» –

one of the most effective methods of protecting the metal surface from corrosion. When the composition “Fluora-B5” interacts, a neutral (passive) compound is formed on the surface that can resist the course of corrosion processes.

This treatment is called passivation of the metal.

After this process is completed, a thin film is formed on the surface. It has the chemical properties of not reacting to oxidation and thus prevents the destruction of not only the surface layer, but also the entire part.

 

 

APPLICATION

The composition of all FLUORA ® protective coatings is specially selected in such a way as to ensure a combination of consistent reliable performance characteristics with ease of coating application. These products, marketed under the “FLUORA ® ” brand, provide an environmentally sound

solution based on a balance of safety, performance and beneficial environmental impact.

 

CLEARING

We recommend specialized cleaners “FLUORA A” – a family of solvents with improved properties that provide an optimal balance of safety and performance. Suitable as cleaning solvents.

 

PROPERTIES

• Excellent protective anti-adhesive properties

• Forms a stable protective and separating layer

TECHNICAL PARAMETERS

Application All areas of industry

Action a thin protective coating is created, which allows you to significantly change the coefficient of adhesion (sticking).

Density at t=20oC Of 0.8-1.3 g/somz

 

Consumption rate 1 kg

The number of layers on 10.12 m (average)

single layer

Drying time

Full cure time up to 30 minutes

3+ hours

Application temperature:

-20°C … +50°C

 

Application

 

Passivator “FLUORA-B5” industry sphere Rolled

metal, auto parts

Finished metal products

 

 

Pipe Metal Structures