FLUORA-B4 Hydrophobic
APPLICATION
The thin –layer protective coating “FLUORA-B4” is a composition, after application and drying of which, the surface acquires the properties of hydrophobicity, thus creating a protective layer on the treated surface.
They are widely used to protect microelectronics parts, premises, walls, facades, polymers, and equipment.
- TU: 2412-003-13868195-2014
- EAN:
- Article:
- TI:
APPLICATION
The thin –layer protective coating “FLUORA-B4” is a composition, after application and drying of which, the surface acquires the properties of hydrophobicity, thus creating a protective layer on the treated surface.
They are widely used to protect microelectronics parts, premises, walls, facades, polymers, and equipment.
Areas of application, Industry
hydrophob “FLUORA-B4”
Facades, premises, equipment
Printed circuit boards, cabinets, Microelectronic equipment,
Electrical equipment, machine tools
Moisture-proof coating
TECHNICAL PARAMETERS
Application: All areas of industry
Action creates a thin protective coating that allows you to significantly change the wetting angle.
Density at t=20oC Of 0.8-1.3 g/somz
Consumption rate 1 kg
The number of layers on 10.12 m (average) single layer
Drying time Full cure time up to 30 minutes 3+ hours
Application temperature: -20°C … +50°C
APPLICATION
The composition of all FLUORA® protective coatings is specially selected in such a way as to ensure a combination of consistent reliable performance characteristics with ease of coating application. These products, marketed under the “FLUORA® ” brand, provide an environmentally sound
solution based on a balance of safety, performance and beneficial environmental impact.
CLEARING
We recommend specialized cleaners “FLUORA A” – a family of solvents with improved properties that provide an optimal balance of safety and performance. Suitable as cleaning solvents.
THICKNESS
The thickness of the chemisorbing/adsorbing film is up to 100 nm, the total layer is up to 1 mm.
PROPERTIES
• Excellent protective hydrophobic properties
• Forms a stable protective and separating layer to dirt and moisture.
• Suitable for all cold curing processes such as COLD-BOX-AMIN, RESOL-CO2, BETA-SET, RED – SET and other similar processes
They are polymers with efficiency advantages that have long distinguished FLUORA ® from competing technologies for manufacturing thin-layer coatings, such as hydrocarbon or silicone
It is not a LVH.
THE IMPACT ON THE ENVIRONMENT
• Do not contain ODS
• Are not carcinogenic
• Not explosive
• Does not irritate
• There is a safety data
sheet
APPLICATION
• Can be applied by spray, immersion (dipping), wetting, roller
• Low consumption of the composition
• The estimated amount of the composition is 1 kg per 10-12 m2 of surface
SPEED
• Lack of any training requirements
• Dries in a few minutes without the need for heat treatment
• You can work without waiting for drying
COLOR
• Transparent (depends on the surface)