EPILAM AQUA-A7 Repellent
Repellents “EPILAM ® AQUA-A7” are intended for impregnation. Transparent composition that allows you to get on the surface of multi-functional thin coatings of long-acting for comprehensive protection of surfaces giving the properties of gyase-water repellency, oil repellency, hydrophobicity, bactericidal, anti-adhesion.
The thickness of the chemisorbing / adsorbing / encapsulating film is up to 100 nm.
It is economical and does not affect the subsequent processing, makes it easier to clean the surface.
APPLICATION
Composition in cans, metal barrels.
The composition of all AQUA ® protective coatings is specially selected in such a way that after application, a thin-layer uniform coating is created on the surface in a short time, where a combination of consistent reliable performance characteristics with ease of coating is provided. These products, marketed under the AQUA ® brand, provide an environmentally sound
solution based on a balance of safety, performance and environmental benefits.
- TU:
- EAN:
- Article:
- TI:
Application
Compositions “EPILAM ® AQUA-A7” are intended for impregnation. Transparent composition that allows you to get on the surface of multi-functional thin coatings of long-acting for comprehensive protection of surfaces giving the properties of gyase-water repellency, oil repellency, hydrophobicity, bactericidal, anti-adhesion.
The thickness of the chemisorbing / adsorbing / encapsulating film is up to 100 nm.
It is economical and does not affect the subsequent processing, makes it easier to clean the surface.
Composition in cans, metal barrels.
The composition of all AQUA ® protective coatings is specially selected in such a way that after application, a thin-layer uniform coating is created on the surface in a short time, where a combination of consistent reliable performance characteristics with ease of coating is provided. These products, marketed under the AQUA ® brand, provide an environmentally sound
solution based on a balance of safety, performance and environmental benefits.
Clearing
It is recommended to use specialized cleaners “FLUORA-A” – a family of cleaning agents with improved properties that provide an optimal balance of safety and performance. Suitable for cleaning and degreasing the surface of metals and non-metals from polymers, bitumen, carbon deposits, resins, oils, dirt, acids. They have a high penetrating and dissolving effect.
Color/Thickness
Transparent/ green. Ultra-thin coating
PROPERTIES
• Excellent protective, hydrophobic and anti-adhesive properties
• Contribute to resistance to dirt, damage and wear
APPLICATION
compositions, very small amounts of these materials are required to achieve a significant reduction in surface tension, which for customers means lower concentrations used
• Can be applied by immersion, spraying, with a brush or
by douching
• Chemically inert substances
• The calculated amount of the composition is 0.1 kg per 1-1.2 m2 of surface
THE IMPACT ON THE ENVIRONMENT
• Do not contain ODS
• Are not carcinogenic
• Not explosive
• Does not irritate
• There is a safety data
sheet
APPLICATION
• Can be applied by spray, wetting, roller
• Low consumption of the composition
TECHNOLOGY
• Dries within: up to 30 minutes without additional equipment. You can work without waiting for drying
COLOR
Colorless (depends on the surface)
Green
Packing
5L, 10l, 20L, 200L, 500L
TECHNICAL PARAMETERS
The action creates a thin protective coating, which significantly reduces the coefficient of adhesion (sticking) and the degree of corrosion on the treated surfaces.
Density at t=20oC
0.8-1.3 g/somz
Number of layers
Consumption rate 1 l One (single layer)
at 8.12 m (average)
The thickness of the coating
Thin-layer (ultra-thin) coating, up to 1 microns
Application temperature:
-15°C +45°C (material and base)
Time
drying time up to 30 minutes
MODIFICATION “EPILAM AQUA-A7”
AQUA A71 impregnation, oil-repellent
AQUA A72 impregnation, mud-water-repellent
Areas of application
EPILAM AQUA-A7 Industry
For textiles, fabrics, polyester, cashmere
For special clothing (mechanics, drivers, etc.)
For processing car interiors
For leather, suede products and polymers