EPILAM AQUA-A51 hand disinfection

“Epilam AQUA-A51” Сoncentrate antiseptic for hands
“Epilam AQUA-A53” Ready-made composition – antiseptic for hands

Application
It is used for antiseptic treatment of hands, disinfection, reducing the development of bacteria, disinfection, sterilization, sticking.
The product is only for external hand treatment. Ingestion is prohibited.

  • TU: ТУ 2412-002-13868195-2012
  • EAN:
  • Article:
  • TI: 2207-043

Application

It is used for antiseptic treatment of hands, disinfection, reducing the development of bacteria, disinfection, sterilization, sticking.

The product is only for external hand treatment. Ingestion is prohibited.

Disinfectant – anti-ADHESIVE film-forming composition “EPILAM ® AQUA A5” when applied:

– clean surface;

– disinfects, stearilize;

– creates an ultra-thin long-acting protective coating.

PROPERTIES

• Excellent cleaning, anti-adhesive, antiseptic, antibacterial and anti-corrosion properties

• Has cleansing properties

• It has protective properties

• Suitable for all cold cleaning and curing

PROCESSES

.

• A high degree of purification and bakteriostatichnosti

• High degree of coverage on the surface

• Long-term protection and bacterial resistance

• Represent effective polymers, which have the advantages of competing technologies is not the HFL.

 

THE IMPACT ON THE ENVIRONMENT

• Do not contain ODS

• Are not carcinogenic

• Not explosive

• Does not irritate when properly concentrated

• There is a safety data

sheet

APPLICATION

• Can be applied using conventional hand treatment methods

• Low consumption of the composition

SPECIFICATION

 

Application area

 

All applicable areas

Characteristics

It creates a thin protective coating that can significantly reduce the adhesion coefficient (adhesion) and the degree of corrosion on the treated surfaces.

Density at t=20ºС

 

0,8-1,3 g/см³

 

Number of layers

   Consumption rate, 1 L

One (single layer)

              at 8 … 12 m.kv (on average)

Coating thickness

 

Thin-layer (ultrathin) coating, up to 1 micron

 

Application temperature:

 

+5°С +45°С   (material and base)

 

Drying time

Up to 10 min

 

Application

It is used for antiseptic treatment of hands, disinfection, reducing the development of bacteria, disinfection, sterilization, sticking.

The product is only for external hand treatment.

Ingestion is prohibited.